​Several conditions of CNC machining center

 When using a CNC machining center, there are many things to pay attention to. It is necessary to pay attention to the safety of operation and the maintenance of the CNC machining center.

Many people are not very clear about these matters, so we are using the CNC machining center. What conditions need to be met at that time, let's give you a detailed introduction.

1. Power requirements

Generally, the CNC machining center is installed in the machining workshop, not only the environment temperature changes greatly, the use conditions are poor, but also there are many kinds of electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location of the machining center needs to be strictly controlled. The power supply voltage fluctuation should be within the allowable range and remain relatively stable. Otherwise it will affect the normal operation of the CNC system of the machining center.

2. Environmental requirements for machining center location

The location of the machining center should be far away from the vibration source, direct sunlight and thermal radiation, and humidity and airflow should be avoided. If there is a vibration source near the CNC machine tool, an anti-vibration trench should be set around the machining center. Otherwise, it will directly affect the machining accuracy and stability of the CNC machining center, and cause poor contact of electronic components, failures, and affect the reliability of the machining center.

3. Use the machining center according to the instructions

When using the machining center, the user is not allowed to change the parameters set by the manufacturer in the control system at will. The setting of these machining center parameters is directly related to the dynamic characteristics of each part of the machining center. Only the gap compensation parameter value can be adjusted according to the actual situation.